Technical Information | Focus Applied Technologies

Penang, Malaysia +60 11 1632 2699 sales@focusappliedtechnologies.com

Focus Applied Technologies Sdn Bhd

The following technical information sheets provide detailed guidance on dyno setup, sensor calibration, vehicle testing procedures, and safety protocols for our equipment range.

IS1

Load Cell Testing & Trouble Shooting

Procedures for verifying and troubleshooting dyno load cell accuracy and calibration.

IS2

Dyno Load & Transformer Sizing

Guide for calculating proper load resistor and transformer sizing for dyno installations.

IS3

Fuel Injector Calibration

Step-by-step fuel injector flow calibration procedure for EFI systems.

IS4

Vehicle Road Load

Methodology for determining and applying vehicle road load coefficients on chassis dynos.

IS5

Dynamic-Weight Measurement

Techniques for measuring dynamic wheel loads during chassis dynamometer testing.

ElectroStatic Charge

PDF document — ElectroStatic charge safety and mitigation guidelines for test environments.